Search results

Big thanks!

Small typo in to version number on post title: exists 8.15-5590, but needed 8.15-5595.

Ok! Sensor's is show.

Read in order: 1) RAM error - Windows Hardware Error sensor's - if RAM working success, then this sensor's show zero in to counter, else use Pasmark MemTest86 Pro or MemTest86+ for test RAM using single core mode and 4 pass. If show of end PASSED OK!. else replace failure RAM module or down RAM...

This is a crystal temperature, but 120 degrees - a bit too much, but although it is permissible, I would think about improving cooling since in field transistors (most modern digital chips, including almost all CPU, GPU and memory chip's are based on them, which allows great reduce the current...

Try check device connect (both power and SATA cable), BIOS/EFI SATA hardware setting's - mode, or SATA cable then some cable can't work on 6 Gb/s speed. fix typo

Aso Your can use this tools (today, with his help, I checked PSU, but the one that stood in the car had to disassemble - I don’t know what happened can a solar storm, but when only a crack of discharges turned on and turned off after a while. So you have to look at what refused and put a spare...

rabithole1234 Try check PSU use example tool - this tool not required power then used checking PSU Chiftec GPD-750 before replays Refusing (probably a breakdown in the input chain - the crack of discharges is heard, the zyg turns off for a minute. I have not watched with devices yet - once) PSU...

So you did not check the voltage, but immediately decided "The program is to blame!" But, alas, I will disappoint - electronics are the science of contacts and does not forgive self -confidence and violations of instructions. And the fact that the device turns on does not mean that it works...

For starters, you can trust the readings of the multicoctroll microcircuit with readable BIOS only after checking the voltages at PSU outputs with a voltmeter, and not a cheap displacement of the DT830 - DT838 type, but a normal device, for example, (these are relatively cheap, but quite...

Big thanks! Typo in to VERSION_INFO_STRUCTURE find in v8.05-5490 is fixed.

Big thanks!

HWiNFO x64 Find typo in to VERSION_INFO structure: File version info File version 8.5.5490.0 Product version 8.5.5490.0 File OS VOS__WINDOWS32 File type VFT_APP Machine x64 OS version 6.1 / 0.0 Subsystem WINDOWS_GUI 6.1...

Just rename it use: setting's -> Custom - > sensor libel ... Very simple....

No, I use only HWiNFO64 for hardware monitoring - other tool don't needed. Most of all, under suspicion, the possible errors of the RAM controller because In one of the banks there are LRDIMM memory modules with different iMB (Isolated Memory Buffer): Memory: 131072 MBYTES @ 933 MHZ...

I don’t like something, but with the errors of the RAM controller it is clear - you need to complete the experiment with the RAM and change LRDIMM in one of the channels so that the pairs are the same iMB, and not different as it is now. The phenomenon gets out, provided that we launch the...

Observation - when starting hwinfo64 from the console through hwinfo64lauuncher, always with the exception of launch through the start /b command (at the same time, CMD is turned off CTRL -C processing). You can use the same technique that I use to launch the independent CMD consoles (if the...

Thinkpad I try test - reboot Win7 SP1 x64 (+ HotFix Windows6.1-KB2619497-v2-x64 needed for system have CPU used more 8 core and/or more 16 Mb L3 cash then all may system based Xeon E5-2697v2 - is server family cluster CPU have 12 core / 24 threads and L3 30 Mb) and start success v7.73-5381 use...

to Martin OS Win7 SP1 X64, command (I use Far Manger v3.0.6281.0 (Private) x64) start /i HWiNFO64 - extracted HWiNFO64Launcher.exe, start OK! Thanks!

Agreed. Personally, I do not use OSD since each extra window on the screen distracts attention from the main task, but it will come in handy to someone.