Search results

Hi Martin, Big fan of HWiNFO, hope you get the support you need from this, certainly deserve it. Am I correct in thinking if I just use HWInfo (personal use) to monitor my PC (no other software interrogating it) the time limits on Shared Memory Interface won't affect my use?

Not sure, maybe the following discussion is relevant (I don't really know much about those cards):

Hi Bluecube, I don't quite get your post - is it a question or a comment? Is the highlighted row suggesting you think the throttle is triggered by a GPU Hotspot, rather than the GPU PPT Limit, or are you not intending to draw attention to that row? Kind regards

Hi Zach, Sorry for the late reply. Looking at the other specs both kits of ram are identical, except that one kit lacks the thermal sensor. Looking at the (cardboard / plastic case) packaging, looks like one kit might have been manufactured (or at least packaged) earlier than the other, but...

Indeed! Or, if only my pump would run upside down, I could flip the pc over and run it as a hovercraft ;)

3(!) Extra exhaust fans up top did the trick - ram now consistently under 50c, other temps all good. I now just need an anchor to stop my pc lifting off the ground when it starts up :)

Hi, Sorry to see you're having problems. You say 'Edit: i just updated bios a week ago'. If you didn't have a good reason for updating the bios, I would consider reinstalling the earlier version. Two sticks of mismatched ram - that also could be your problem (or maybe you have more than one...

6 push / pull at front plus more aggressive fan settings has improved things quite a bit. Max memory temperatures under load now around 50/51. Hopefully with some extra exhaust fans it will improve further.

Hi Zach, thanks but the Asus x570 e is apparently not capable of measuring dram voltage. (https://www.hwinfo.com/forum/threads/missing-dram-voltage-asus-strix-x570-e-nuvoton-nct6798d.6079/) yes, I think some extra exhaust fans are worth a try. I'll give that a go. Kind regards

Have you checked that you're not overloading the header? Not sure of the power draw of your fans or the supply to the header but many headers are only powered to support a maximum of 4 fans (see e.g. https://www.amazon.com/ask/questions/Tx36ZT5RCR0P8QP - but obviously you'd need to check the...

Hi Zach, Thanks for the tip, I tried ThaiphoonBurner and there is a sensors column for the kit in the Asus, but *not* for the kit in the Gigabyte?! But it's exactly the same kit of ram! Am I correct in thinking this is a problem with the kit or is it possible G.skill made different versions of...

Hi Zac, Thanks. For both sticks of ram, the top row in my system summary table (corresponding to the xmp values the memory running at) shows 1.35 v. (All the lower rows in that table show 1.2 v - are these pre-defined values for other possible memory configurations I haven't chosen?) I have...

Hi Martin / Zach, Thanks, just put the ram from the Gigabyte z390 Aorus Pro Wifi into the Asus ROG Strix x570 e and now HWiNFO shows no DIMM temp readings on the Asus, so I think it's the ram. Swapping the original ram back into the Asus, the Dimm temps appear again. I'll also have a look at...

Okay, thanks I'll swap the ram and report back. Kind regards

I don't recall installing any; can't see any running at the moment or installed. I think Gigabyte's current software is RGB Fusion 2.0 - doesn't seem to be installed. G.Skill's software is Trident Z - doesn't seem to be installed. Anything else I should look for? As I have two identical kits, I...

Okay, thanks. Happy to run an experiment if you have a suggestion. I assume I can turn off ( :( ) the rgb lighting in the bios somewhere; is that worth a try? I have in the past run memtest on this kit (just routine - wasn't having problems, didn't find any); should I run that again? Kind regards

Thanks. Hope this is what you want. If I've posted any data about my computer that shouldn't go on the net could you please delete the file(s) after downloading. Kind regards

Thanks Martin, The ram is G.Skill Trident Z Neo (F4-3600C16D-32GTZNC 32GB), which does support a thermal sensor. Might I have inadvertently disabled a display in settings?

Hi everyone, Just had a look at DIMM Temp readings for an Asus ROG Strix x570 e, with 2* 16 GB G.Skill Trident Z Neo (F4-3600C16D-32GTZNC 32GB) and wondering if I should be concerned about what I see. Everything is running at stock except the XMP/DOCP profile for the ram is on. With a very light...

Hi Martin, Thanks again for the great software. I don't see any DIMM Temp readings for Gigabyte z390 Aorus Pro Wifi (I'm using the latest v 6.42 4360). Can this motherboard give temp readings for the ram? If so, are you planning to add them to HWiNFO at some point? I was just looking at the...