Dell Optiplex 320 ATI RC410 GPU/Memory speeds swapped

[nelsonhf]

Hi, I noted a minor glitch with HWInfo 6.00 on an old Dell Optiplex 320 integrated ATI Radeon Xpress 200. The GPU and Memory speeds are swapped both in the summary screen and in the Video Adapter information. GPU-Z and AIDA64 shows the correct info. Screenshoots and debug info attached.

[attachment=3243][attachment=3244]

Regards,
Nelson.

 

[Martin]

Thanks, I will try to fix this in the next build.

 

[Martin]

I have released v6.02, that should fix this. Please try.

 

[nelsonhf]

Hi, tried v6.02. The GPU clock is correct but the memory clock is missing and the reported width is incorrect. I think it should report 64-bit as RC410 is a single-channel memory chipset.

[attachment=3248][attachment=3249]

It now shows the same amount of memory as GPU-Z. The old v6.00 showed the maximum UMA size.

[attachment=3250]

Attached the v6.02 debug info.

Regards,
Nelson.

 

[Martin]

Thanks, I will fix the memory bus width in the next build.
But I'm still not sure about the GPU memory clock. Even GPU-Z shows 0 MHz as actual clock.

 

[nelsonhf]

Thanks, I will fix the memory bus width in the next build.
But I'm still not sure about the GPU memory clock. Even GPU-Z shows 0 MHz as actual clock.

Yes, GPU-Z shows 0MHz for actual clock but shows the correct 266MHz as Default clock. HWInfo 6.00 displayed it too but in the GPU clock field. AIDA64 don't show memory speed, just the GPU clock (300MHz). As this is a UMA chipset maybe you can use this info since the memory controller is really running at 266MHz (533MHz DDR2).

[attachment=3252]

I didn't found any datasheet of these old chipsets yet, but found some old descriptions:
https://www.anandtech.com/show/1490
http://ixbtlabs.com/articles2/mainboard/ati-xpress-200-ie-chipset.html

The RS/RC400/RC410 even based on X300 (RV370) core is a cut down version with only 2 ROPs x 2 TMUs. HWInfo 6.02 shows 4 ROPs (which is correct for the full RV370 and the AMD counterparts of this chip - RS48x).

Regards,
Nelson.

 

[nelsonhf]

Hi, tried the latest beta 6.03-3690. The GPU memory width is fixed. The ROP's count still show as 4, AIDA64 and GPU-Z shows as 2.

[attachment=3324]

Regards,
Nelson.

 

[Martin]

Thanks, will try to fix this in the next build.