Hi to Everyone,
First of all, thank you for this great program and allowing us using for free, its much appreciated.
I've been using HWiNFO for a while and it's been my favorite monitoring software and not because its free but because is simple, yet very rich in what is design for.
Although the program its simple to use I got stomped with something I cannot figure out so I'm hoping to get some help if possible.
I do a lot of backups e.g. windows images, work backups, It can be as much as 300-500 GB per day I use Paragon HDM 15 Professional for that, Paragon its configured to run silently in the background making full and incremental backups at specified times , depending on selected HDDs and partitions.
My workstation is equipped with Aquaero and Aquasute that automatically controls several fans and some of them being enabled only based on my preferable temperature threshold and some of the fans are actively cooling 4 of my new 10TB Helium drives, yes this drives do run hot, despite what WD saying they need active cooling at all times.
Anyhow, my Windows 7 x64 task scheduler is set to sometimes wake my PC in the middle of the night and to make the backups, once backup is done it puts PC back to sleep.
Here is the issue.. My Aquaero's controller its pointed to HWiNFO's HDD temperature sensor to activate the fan once any of the drives reach 40C and to keep them at that temperature and that means by fan going on and off as needed and it all works great as long as my monitor is on.
If I'm at my desktop and backup happen to run, HWiNFO runs smoothly and sends the info to Aquaero's controller to do its thing but, If the PC is asleep and task scheduler happen to wake up the PC, the backup commences as normaly with monitor still being asleep than HWiNFO it's not working, and if the backup will run for 2 hours, the temperature of the HDD can get 50 C, yet HWiNFO not kicking in...... and this is the part where I get stomped........ until I move the mouse to wake up the monitor, then HWiNFO sends the info to the controller and everything its fine.
I have way around that, by using Aquaeros system temperature sensor and it works as it should, the only problem is sometimes Aquaero will points to a different drives e.g. SSD and thy never run hot so it's wrong info for the controller, unlike HWiNFO seem to always point to the right drive.
I hope that I made this clear enough, if not , please ask away.
[size=small]
Any help with this would be greatly appreciated
[/size]
First of all, thank you for this great program and allowing us using for free, its much appreciated.
I've been using HWiNFO for a while and it's been my favorite monitoring software and not because its free but because is simple, yet very rich in what is design for.
Although the program its simple to use I got stomped with something I cannot figure out so I'm hoping to get some help if possible.
I do a lot of backups e.g. windows images, work backups, It can be as much as 300-500 GB per day I use Paragon HDM 15 Professional for that, Paragon its configured to run silently in the background making full and incremental backups at specified times , depending on selected HDDs and partitions.
My workstation is equipped with Aquaero and Aquasute that automatically controls several fans and some of them being enabled only based on my preferable temperature threshold and some of the fans are actively cooling 4 of my new 10TB Helium drives, yes this drives do run hot, despite what WD saying they need active cooling at all times.
Anyhow, my Windows 7 x64 task scheduler is set to sometimes wake my PC in the middle of the night and to make the backups, once backup is done it puts PC back to sleep.
Here is the issue.. My Aquaero's controller its pointed to HWiNFO's HDD temperature sensor to activate the fan once any of the drives reach 40C and to keep them at that temperature and that means by fan going on and off as needed and it all works great as long as my monitor is on.
If I'm at my desktop and backup happen to run, HWiNFO runs smoothly and sends the info to Aquaero's controller to do its thing but, If the PC is asleep and task scheduler happen to wake up the PC, the backup commences as normaly with monitor still being asleep than HWiNFO it's not working, and if the backup will run for 2 hours, the temperature of the HDD can get 50 C, yet HWiNFO not kicking in...... and this is the part where I get stomped........ until I move the mouse to wake up the monitor, then HWiNFO sends the info to the controller and everything its fine.
I have way around that, by using Aquaeros system temperature sensor and it works as it should, the only problem is sometimes Aquaero will points to a different drives e.g. SSD and thy never run hot so it's wrong info for the controller, unlike HWiNFO seem to always point to the right drive.
I hope that I made this clear enough, if not , please ask away.
[size=small]
Any help with this would be greatly appreciated
[/size]
