I just did a complete rebuild of my system, and now HWiNFO isn't working.
My System:
Windows 10 - New Install
Asus Z97 Extreme6
i7-4960k
Samsung SM951 (Boot Drive)
Western Digital Green 2tb (2nd drive)
Video - Onboard VGA
HWInfO Version: 5.04.2630, then 5.06.2640 (Both versions behave the same)
I was using HWiNFO successfully on this machine (although I had only opened it once during the initial install) before I rebuilt. Now, I was able to install, but when I run it I get the following:
While loading and gathering specs, HWiNFO stops responding at, "Detecting IDE\SCSI...", then 1-3 minutes later the computer stops responding and I have to do a manual restart (power button).
I tried disabling the Storage check and then it locks up at "Analyzing PCI BUS..."
I can't find anything in the systems event viewer that links to HWiNFO that might help identify the problem.
I also can't find a way to enable logging to see if I can produce a log to help identify the problem
Any help would be appreciated
My System:
Windows 10 - New Install
Asus Z97 Extreme6
i7-4960k
Samsung SM951 (Boot Drive)
Western Digital Green 2tb (2nd drive)
Video - Onboard VGA
HWInfO Version: 5.04.2630, then 5.06.2640 (Both versions behave the same)
I was using HWiNFO successfully on this machine (although I had only opened it once during the initial install) before I rebuilt. Now, I was able to install, but when I run it I get the following:
While loading and gathering specs, HWiNFO stops responding at, "Detecting IDE\SCSI...", then 1-3 minutes later the computer stops responding and I have to do a manual restart (power button).
I tried disabling the Storage check and then it locks up at "Analyzing PCI BUS..."
I can't find anything in the systems event viewer that links to HWiNFO that might help identify the problem.
I also can't find a way to enable logging to see if I can produce a log to help identify the problem
Any help would be appreciated