HX1500i 12V drops to exactly 3.328v

[rabithole1234]

Not sure what's causing this, but it started about a week ago. The 12V drops down to 3.328v briefly and then goes back to normal. It's always the exact same voltage as the 3.3v...not sure if that's a coincidence or not. The issue usually doesn't happen again unless I close hwinfo and reopen it. The 12v on my mobo and GPU don't drop so I'm hoping this is just a software problem and not hardware.



I've sort of seen something like this happen with the ASUS EC sensors when I had armory crate open at the same time. The temperatures would drop to 0C and then go back to normal. I don't have any other sensor programs running in the background right now though.

 

[Martin]

This is certainly a glitch in monitoring. Are you running some other monitoring tool that accesses the PSU? If yes, it could be caused by such conflict.

 

[VictorVG]

rabithole1234​

Try check PSU use example tool - this tool not required power then used checking PSU Chiftec GPD-750 before replays Refusing (probably a breakdown in the input chain - the crack of discharges is heard, the zyg turns off for a minute. I have not watched with devices yet - once) PSU AERO BRONZE M850 and very simple for use - see foto.

 

[rabithole1234]

This is certainly a glitch in monitoring. Are you running some other monitoring tool that accesses the PSU? If yes, it could be caused by such conflict.

I forgot that I installed something called ModBro for my sensorpanel and apparently it interferes with HWinfo. I uninstalled it and haven't had this problem since.