Incorrect sensors readings (GIGABYTE GA-B150-HD3)

oldman777

Member
Hello Martin.

First of all would like to thank you for this great program.

My motherboard (GIGABYTE GA-B150-HD3) almost all of the sensors in HWINFO are incorrect readings (voltage, temperature, etc.).




In my motherboard BIOS/UEFI all of the sensors readings correct. 

Screenshot, HWiNFO64.DBG  and HWiNFO64 Report File:
[attachment=2041]

Thanks in advance.
 

Attachments

  • GIGABYTE GA-B150-HD3.7z
    255.3 KB · Views: 6
Thanks for your report. Can please also attach a screenshot of GIGABYTE EasyTune tool showing all sensor values, so I can adjust them properly in HWiNFO ? Best would be a side-by-side screenshot with HWiNFO.
 
Install any utility separately, it impossible now. First you need to install (APP Center (Intel 100 series) and NET Framework 4.5.
I install (APP Center) and after (EasyTune), but there is now no sensors data - buttons for overclock only.
The sensors are located in separate utility - (System Information Viewer (Intel 100 series)

A pair of screenshots (System Information Viewer) and same in attachment:






[attachment=2042]
 

Attachments

  • System Information Viewer.7z
    879.6 KB · Views: 2
Thank you Martin for your fix in Beta v5.39-3015, now seems all right. The only thing in doubt - Temperature 4 = 94° C


[attachment=2045]
 

Attachments

  • 2016-10-27_225037.png
    2016-10-27_225037.png
    89.7 KB · Views: 9
Thanks for your feedback.
"Temperature 4" could be an invalid reading from a sensor which is not connected.
 
[attachment=2139] 


[attachment=2140]

Hi Martin.
Suddenly found that it seems "Core #0,1,2,3 Distance to TjMAX" Minimum and Maximum values need to swapped. The Minimum instead of Maximum and Maximum instead of Minimum.
Thanks.
 

Attachments

  • 2017-01-29_225551.png
    2017-01-29_225551.png
    86.7 KB · Views: 7
  • Report OLDMAN-PC.zip
    97.7 KB · Views: 1
Back
Top