News coolers of corsair

konker

Member
You can add support for the new cooling models of corsair, here a screenshot of the new H115i RGB PRO TX model 53e315017bb8e14763dbf0cd40ed7753.png
 

Martin

HWiNFO Author
Staff member
I can add experimental support in a test build, but really don't know if that will work as Corsair refuses to cooperate.
Could you run a test if I provide you such build?
 

red-ray

SIV Author
I echo Martins comments about Corsair and also have a SIV that should report it, please will you try it?

To do this do Menu->File->Download->SIV Beta to get SIV 5.45 Beta-05 or later and post Menu->Tools->Link Status + Menu->Tools->Link Limits so I can check all is OK.

There is also a H100i variant, do you happen to know it's PID?

Note that for SIV to correctly report the H115i RGB PRO XT you need to exit any Corsair software as it fails to correctly use the locks. Both HWiNFO and SIV do correctly interlock access so having both active should be fine. You can look at Menu->Help->Lock Handle to check no Corsair software is active.
 
Last edited:

red-ray

SIV Author
Thank you for checking this out. Basically the RGB Pro XT uses the same protocol as your old RGB Platinum.

From [Lock Handle] I can see just SIV was running, have you tried with both HWiNFO and SIV reporting the RGB Pro XT at the same time? I expect all will be OK and if there are issues then [Link Status] will report wonky values and/or errors.

It just occurred to be that the PID should be in CorsairHIDCoInstaller.inf so if you have that file on your system please will you post it? It's likely to be within C:\Windows\System32\DriverStore\FileRepository.
 

Rapidian

New Member
Martin, could you add the Corsair H100i RGB PRO XT as well? The product id is 0c20 (as opposed to 0c21 for the H115i). This uses the same pump as the Platinum (Coolit), just the size is different. The H100i is a 240mm rad and the H115i is a 280mm. I expect the rest stays the same. I do have one recently acquired and would like to get some readout without iCUE.
 

Martin

HWiNFO Author
Staff member
Martin, could you add the Corsair H100i RGB PRO XT as well? The product id is 0c20 (as opposed to 0c21 for the H115i). This uses the same pump as the Platinum (Coolit), just the size is different. The H100i is a 240mm rad and the H115i is a 280mm. I expect the rest stays the same. I do have one recently acquired and would like to get some readout without iCUE.
Thanks for the ID, this will be added in the next (Beta) build.
 
Top