Search results

  1. E

    HWiNFO v7.73-5370 Beta released

    I too have the same issue and the same error message on task scheduler.
  2. E

    PCI/PCIe Bus WHEA Error

    Thanks, Ill try to move it up to the pcir slot that is connected to the CPU. I believe all other slots are connected to the chipset.
  3. E

    PCI/PCIe Bus WHEA Error

    Thanks for taking a look. Do you mean its a fault drive or just a problematic slot and I should try using a different slot?
  4. E

    PCI/PCIe Bus WHEA Error

    I was able to catch ang error but the debug is133MB large. Uploaded it on my google drive instead. https://drive.google.com/file/d/1ujsdrg1dBpU3Wel8v-J8jZDuFe66Dxls/view?usp=sharing
  5. E

    PCI/PCIe Bus WHEA Error

    I've been recently getting a PCI/PCIe Bus and earlier it shot up to something like 3,000 error counts and I am unsure where it is coming from. Through a quick search I found that HWinfo64 might be able to tell the exact source of this error with debug mode enabled. I found a way to enable the...
  6. E

    Minimize Sensors on startup is not working

    When I uninstall HWinfo64 no other instance of the app starts so I believe that there is no other location. For now I have unchecked HWinfo64 from MSI AB's data source.
  7. E

    Minimize Sensors on startup is not working

    Found the culprit. It seems that allowing MSI-AB to access hwinfo64's dll's seems to trigger a program start which will ignore the minimize on start settings.
  8. E

    Minimize Sensors on startup is not working

    I noticed today that HWinfo64 Pro v7.37-4970 starts up showing the sensor windows when I do not have that setting enabled to begin with and I also have the minimize sensor on start up. I have unticked those boxes, uninstalled the app and manually deleted the left over files on the folder and...
  9. E

    GPU 8PIN Input Voltage reading, possible error

    Thanks, must be an uncalibrated sensor on tbe GPU. I was able to get a working digital multimeter and I am getting a read out that is 0.1V close to what HWinfo64 is reporting on 12v whicj is 11.98V to 12.1V
  10. E

    GPU 8PIN Input Voltage reading, possible error

  11. E

    GPU 8PIN Input Voltage reading, possible error

    Going to have to get another multimeter, The current one I have reads 16v off the pcie pins and reads 1.8v on a 1.2v battery
  12. E

    GPU 8PIN Input Voltage reading, possible error

    @Martin is the pcie slot voltage voltage reading coming off from thr GPU sensor or the motherboard sensor?
  13. E

    GPU 8PIN Input Voltage reading, possible error

    Similar readings with GPUZ, My GPU is running fine though no crashes or anything. Sounds like my PSU is going bad ? I removed the 8pin extension cables I was using and It has improve the minimum reading of 11.2V, still a little too low and should be expected around 11.8v - 12.1v maybe ?
  14. E

    GPU 8PIN Input Voltage reading, possible error

    My GPU input voltage shows 10.94v it seems a little to low for even the GPU to power on or run at a stable manner, Could be an offset error? My MB sensors show 12.240 for 12volts.
Back
Top