Logging SSD locks up the program

pmjm

New Member
Hello,

Relatively new user to Hwinfo64. I'm trying to create a CSV log the following data from my NVME SSD: Drive Temperature, Drive Temperature 2, Read Rate, Write Rate. I have "disabled monitoring" on every other hardware device in the program.

The data displays fine in the program interface, and even draws the graph if I open the graph view. However when I click the log button and specify a CSV file, the program starts locking up. It freezes and stops responding for roughly 30-60 seconds at a time. If I go crazy and repeatedly click the log button again, eventually it stops logging. But if I open the CSV file it created, I get columns for date and time every few seconds, but no other data is recorded, the fields are blank.

Any help would be appreciated. Thanks in advance!
 

Martin

HWiNFO Author
Staff member
I can reproduce this problem and working on a fix.
For the time being you should be able to workaround this by disabling all items not needed, then close HWiNFO and start it again.
It should work then without glitches.
 
Last edited:
Top