Monitoring Individual 12VPWR Pins (1-6) via Sensors – Possible Implementation?

GodZilla_Owner

GodZilla_Owner

Member
Hi everyone,

I was wondering if there are any plans to implement sensor data for monitoring the individual 12VHPWR pins (1-6) in HWInfo, similar to what ASUS GPU Tweak III provides.

This would be a great addition, especially in combination with AquaSuite, as it could offer valuable insights for power monitoring and system stability.
Is such an implementation feasible, or would it be too complex due to hardware limitations?

Thanks in advance for any insights!

1741364903650.png
 
I have already requested this information from ASUS but they didn't provide it yet.
If you have such GPU please provide the HWiNFO Debug File, it might tell something..
 
Thanks, I can see something :)
Please create 2 new DBG files - one when GPU is idle and one under stable GPU load and in both cases please note (or screenshot) the pin currents so that I know what was the value when each of the dumps was created.
 
Thanks. Unfortunately the idle file doesn't capture startup of HWiNFO (the data required is captured only during startup/sensor detection). Can you please repeat this one?
 
@Martin I´ve uploaded HWiNFO64-idlev2.DBG to google drive. Hope this times it works, if not should I do a full restart?
Otherwise I can provide a full remote access to this PC if needed.
 
Thanks, that's good now.. I think I found something promising but that will need to be tested. Will post a test build in shortly...
 
Ah sorry, you need to enable decimal digits to show more precise numbers. You can do that in Sensor Settings - Customize.
I will fix this in the next build so that this won't be needed.
 
Looks good, thanks.
I'm wondering about VRM temperatures as they don't seem to match. Can you please create 2 more dumps - first when cooled down and second after a short warm up with significantly higher temperatures reported?
 
Thanks. I think I found 8 additional temperatures but the ASUS tool shows only 4 (excluding the internal GPU). Does it perhaps show more somewhere else?
 
Unfortunately that log doesn't tell much. Anyway, I will add reporting of all 8 temperatures in the next build.
 
Hello, it seems that it doesnt work for Astral RTX 5090 atleast i cant find any sensor i can activate to see values. Could you please look into it? Thank you.
 
You must log in or register to reply here.

Similar threads

A
Need Help Understanding Sensors & Diagnosing High Temperature Readings!
Replies
0
Views
2K
Adeptivity
A
Martin
IMPORTANT CHANGES TO HWiNFO64 COMING SOON
4 5 6
Replies
100
Views
69K
KevinHigh
K
C
Confused by Package/Ring Throttling and Power Limit readings
Replies
8
Views
13K
deadcat27s
D
Jayson Hans Bourne
My thoughtS on this software
2
Replies
35
Views
14K
Martin
Martin
Alia5
Custom 6 Channel USB FanController
Replies
4
Views
6K
Bogan Dr3m'N
B
Back
Top