F foro Member Sep 12, 2018 #1 hi, when i open hwinfo the vrm sensor is not shown but when asus aisuite 3 opens vrm appears in hwinfo. I have an asus maximus vii impact z97
hi, when i open hwinfo the vrm sensor is not shown but when asus aisuite 3 opens vrm appears in hwinfo. I have an asus maximus vii impact z97
Martin HWiNFO Author Staff member Sep 12, 2018 #2 Please attach two HWiNFO Debug Files: one before opening AI Suite (so when VRM sensor is not shown) and another one after opening it.
Please attach two HWiNFO Debug Files: one before opening AI Suite (so when VRM sensor is not shown) and another one after opening it.
F foro Member Sep 13, 2018 #3 Ok Attachments VRM-OFF.DBG VRM-OFF.DBG 2 MB · Views: 4 VRM-ON.DBG VRM-ON.DBG 1.1 MB · Views: 1
Martin HWiNFO Author Staff member Sep 13, 2018 #6 It's not an error, but the system doesn't monitor those sensors by default, it requires explicit enabling.
It's not an error, but the system doesn't monitor those sensors by default, it requires explicit enabling.
F foro Member Sep 14, 2018 #7 I have an other question. What does the value of VCOREREFIN mean, could it be related to the initial / eventual / shadow voltage or pll termination voltage? I can not find it inside the BIOS, the value shown by hwinfo is 1,968v
I have an other question. What does the value of VCOREREFIN mean, could it be related to the initial / eventual / shadow voltage or pll termination voltage? I can not find it inside the BIOS, the value shown by hwinfo is 1,968v
Martin HWiNFO Author Staff member Sep 15, 2018 #8 This sensor is most probably not used on your mainboard, so it doesn't provide valid values.
