MSI G41TM-P33 incorrect reading voltage chip FINTEK F71889

VictorVG

Well-Known Member
I found than HWiNFO32 3.60/3.60.973 and Lavalys Everest 5.50.2253 beta incorrect read power sensors +5V and +12V. BIOS read this sensors true. I check use digital multimetr MASTECH M320 (class 0.5). Found:

+5V sensor:

BIOS ~ 4.96V, multimetr +5.024V, but HWiNFO32 read this sensor data as +3,70V (???)

+12V sensor:

BIOS ~ 11.944V, multimetr +12.147V, but HWiNFO32 read this sensor data as +6,25V (???)

Reports attached

Link on FINTEK Super I/O chip manual:

<!-- m --><a class="postlink" href="http://www.fintek.com.tw/files/productfiles/F71889_V0.28P.pdf">http://www.fintek.com.tw/files/productf ... V0.28P.pdf</a><!-- m --> - full manual
<!-- m --><a class="postlink" href="http://www.fintek.com.tw/files/productfiles/F71889_ab.pdf">http://www.fintek.com.tw/files/productf ... 889_ab.pdf</a><!-- m --> - about chip press release
 

Attachments

  • Reports_and_chip_manual.rar
    17.2 KB · Views: 52
Re: MSI G41TM-P33 incorrect reading voltage chip FINTEK F718

Every mainboard needs special adjustments since they use different connected sensors (it's not an issue of Fintek sensor support).
Please attach a full HWiNFO32 Report and Debug File including sensor data, then I'll try to adjust the values.
 
Re: MSI G41TM-P33 incorrect reading voltage chip FINTEK F718

Ok! Welcome. I get to the house and went out. Now I went from a friend, because simply unable to report on the observation ...
 
Re: MSI G41TM-P33 incorrect reading voltage chip FINTEK F718

Additional. I send required information:

debuglog.htm
HWiNFO32.DBG
HWiNFO32.INI
Standard.htm

debug log, configuration data and perfomance test for reference information.:)
 

Attachments

  • debuglog.rar
    88.1 KB · Views: 50
Re: MSI G41TM-P33 incorrect reading voltage chip FINTEK F718

Thanks for the data. Unfortunately you didn't include the Sensor data in those reports. Please make sure you open the Sensors window and then save the Report (+DBG) and submit again.
 
Re: MSI G41TM-P33 incorrect reading voltage chip FINTEK F718

Ok! I added information:

COLUMBIA.LOG
HWiNFO32.DBG
HWiNFO32.INI
sensors.CSV
sensors.png
sensorslog.CSV
Standard.htm

sorry, my multimeter M320 can't send data to PC - this is portable digital Amper-Volt-Omm meter, class 0,5% ±1 digit, 3,5 digit...
 

Attachments

  • sensors.rar
    133.6 KB · Views: 57
Re: MSI G41TM-P33 incorrect reading voltage chip FINTEK F718

Martin

Big thanks! All data read is correct. :)
 

Attachments

  • datalog.rar
    5.6 KB · Views: 51
Back
Top