Problem with Chassis1 Fan after sleep

I have attach the files.

The fan control logic can work normal after same time (same cycle suspend-resume). But this time is unpredictably. And it's zero after the computer restart, suspend, resume.
 

Attachments

  • HWiNFO64 - 1.DBG
    303.2 KB · Views: 1
  • HWiNFO64 - 2.DBG
    303 KB · Views: 1
  • HWiNFO64 - 3.DBG
    300.7 KB · Views: 1
There is the zero fan problem in the new release.
I have attach the debug file.
 

Attachments

  • HWiNFO64.DBG
    307.2 KB · Views: 3
Thanks for the new dump. It seems the fan shows some RPM after resume, but later the measurement goes out of range. So HWiNFO didn't reconfigure the fan (which actually should be done by the BIOS).
Please try this build and let me know: www.hwinfo.com/beta/hw64_411_1836.zip
 
There is the zero CPU fan problem in the new release.
But there is the zero Chassis1 fan problem also. It's Ok before.

I have attach the debug file.
 

Attachments

  • HWiNFO64.DBG
    308.9 KB · Views: 2
The CPU fan and the Chassis1 fan are zero after resume.

I have attach the debug file.
 

Attachments

  • HWiNFO64.DBG
    302 KB · Views: 1
I made a reboot, suspend, resume 3 times.

1 time - The CPU fan is Ok (there is the zero problem before). The Chassis1 fan is zero after resume (there is Ok before).
2 time - All is Ok.
3 time - As the 1 time

I attached 3 debug files.
 

Attachments

  • HWiNFO64 - 1.DBG
    314.7 KB · Views: 1
  • HWiNFO64 - 2.DBG
    322.4 KB · Views: 1
  • HWiNFO64 - 3.DBG
    300.7 KB · Views: 1
Back
Top