SMART Drive failure not detected.

TheOTGuy

New Member
Hello.

I have an PC that hava RAID1 configuration. I did pull the disk to see if i would get an error from the HWINFo. I did not get the error and this is after several hours.
Intel RST software detected the drive was missing within 5 minutes. Will HWinfo not detect this type of error?

BR/Andreas
 

Attachments

  • 2023-04-17_14-06-08.png
    2023-04-17_14-06-08.png
    64.6 KB · Views: 3
  • 2023-04-17_14-01-00.png
    2023-04-17_14-01-00.png
    239.8 KB · Views: 3
Such error is not detected by SMART, it has no capability to detect a drive removal.
The RAID controller is responsible for such kind of detection. You might look in the main HWiNFO window under Drive(s) if you see a failed status there.
 
Back
Top