Recent content by Ken429

I'm looking dumb again! But...which is more accurate in your opinion the Ryzen stuff or the MSI MEG stuff? I want to believe the MSI MEG values since the CPU(2) and Vcore values are a little lower.

Attached is a screen shot of HWInfo64 v.6.14 showing the reported temps for the 3800X CPU after running Cinebench R20. Note the difference in the CPU temps AMD Ryzen and MSI MEG. I assume the AMD Ryzen temps are close to correct. What is going on with the MSI MEG reported temps? They do not...

I don't know if this is a minor problem or not but...on my Ryzen Taichi X370 and ROG Hero VII X470 systems the memory temperatures show for Dimm[2] and Dimm[3].  On both systems the memory is installed in Dimm[2] and Dimm[4].  Never noticed since there is no memory temps showing on my ASRock...

Still trying to get you a screen shot!

Here you go. Oops, looks like pdf files don't work?!  I'll have to rerun handbrake and create a new screen shot. Ok, I reran Handbrake to create a good screen clip and the problem did not repeat!!  HWiNFO64 showed the Radiator fans returning to normal after Handbrake was done doing it's...

Yes, that fixed the problem with the EVGA CLC AIO. However in the meantime, I got frustrated and installed a custom cooling system with a PWM Swiftech pump and a couple of Vardar fans on the radiator.  The system runs a couple of degrees Centigrade cooler with the custom setup. ...

I just built a system using the ASUS ROG Crosshair Hero VII motherboard and an AMD 2700X processor.  I'm using an EVGA CLC 280 AIO.  Everything seems to work as advertised EXCEPT when I start HWInof64 the fans on the cooler ramp up for no apparent reason - nothing is running except other than...

Like I said, I was looking (searching forum) in all the wrong places.  Based on your comments above I finally stumbled into the Ryzen/Asus thread.  I can only assume the Ryzen/ASRock Taichi information is similar.  Anyway, thanks for the quick response - you made me search the forum until I...

Am I looking in all the wrong places for the Ryzen 1700X core temperatures?  I'm using version HWInfo64 version 5.52.3161.

Yes, and I appreciate the information.  The only thing I was trying to show is CUPID says the VCore is ~1.178 under load and HWiNFO says the VID is ~1.211 under load.  Maybe the two programs are looking at the VID at slightly different times and that's the difference?  Although reporting the VID...

This is what happens under load?  Aida64 fluctuates between 1.178 and 1.212 and HWiNFO fluctuates between 1.192 and 1.240 while running IBT.  CPU-Z is not in the game?!

I have been playing with my Z97 Extreme6/4790K system trying to get it to run "cool" at 4.6 GHz.  In doing so I have been trying to figure out how to control the Vcore using the Adaptive method.  I think I'm getting to where I want to be but stumbled upon the different voltages being reported by...

Your probably right. I wanted a simple MB with no frills for a simple machine. I guess that's what I got! Thanks for the response.

Here's a couple of screen shots.  CPU-Z Core Voltage jumps from .871v to 1.20+ depending on what is running at the time.  I'm not an I-Tune fan and I guess it doesn't show Vcore just the Adaptive Settings?