a quick question about volts

pinworm

New Member
Here are a few selected values I'm not quite sure. Is everything ok?

Bios: 
- [email protected] Ghz (100 / 40x)
- CPU voltage set manual to 1.35V
- LLC 2 / 140%

CPUZ: 
- 1.395 - 1.417 V (mostly 1.417V)
- 3992.2 Mhz (Core Speed)
- 99.92 Mhz (Bus Speed)


HWInfo:
- CPU Core Voltage (SVI2 TFN) 1.356 - 1.362V
- VCore 1.373V - 1.417V
- Core clock 3998.2 Mhz
- +5V: 4.987V

Win10:
- Ryzen balanced power plan: CPU min 90% max 100%

Task Manager:
- CPU Speed 3.92 Ghz (even at load)

---------------------

R7 1800X
C6H
Bios 6201
 

pinworm

New Member
I flashed the latest bios (6302) and this happened:
 

Attachments

  • omgwhatsgoingon.jpg
    omgwhatsgoingon.jpg
    352.5 KB · Views: 8

Martin

HWiNFO Author
Staff member
It means monitoring of those values is disabled in HWiNFO. Select them and hit the "Ins" key to enable.
You might also do a "Restore Original Order" to align them properly.

CPU Core Voltage (SVI2 TFN) should be the most reliable Vcore readout among them all. This is read directly from the voltage regulator.
 
Top