AC Quadro support

Jojo

Member
Hi, one more screenshot.

[attachment=3089]
 

Attachments

  • 2018-10-19 14_17_54-Unbenannt - Editor.jpg
    2018-10-19 14_17_54-Unbenannt - Editor.jpg
    99.4 KB · Views: 10

Jojo

Member
Today I soldered a adaptercable to connect my "incompatible" flowmeter from innovatek with the right Quadro connector for flowmeters.
Now there is a signal on "Flow" which is wrong, because its not possible to set the right impulsrate in the Quadro.

My innovatek flowmeter has got 410 impulses per minute.
with Quadro compatible flowmeter:
-Digmesa 3,3    509 i/min
-Digmesa 5,6    256 i/min
-AC high flow    169 i/min
 

Martin

HWiNFO Author
Staff member
Thanks. So while you created the HWiNFO Debug File, the flow rate was approximately 36-37 l/h ?
 

Jojo

Member
Yes, thats right. But the real flowrate is a bit highter. Like I tried to explaine, in Quadro I can`t set the right impulsrate. I had to select the impulsrate for digmesa 3,3.

btw, is there a way to find a solution for the different specification units (speed, temperature, %) what I registered in SoftSensor testing?
 

Martin

HWiNFO Author
Staff member
I will add experimental reporting of flow rate in the next build.
I'm not aware of any way how to determine the custom units used for soft sensors.
 

Jojo

Member
Never mind, maybe there will be a solution created by AC one day. If not, shouldn`t be that important. All the important sensors are visible with your tool.
I`m not shure if there will be other users wanting the SoftSensors reported as well, or if its just me with my verry specific case of connecting my incompatible flowmeter.
Thanks a lot for your work and straightforward brilliant service.

have a nice weekend
 

Jojo

Member
Hi,
today I updated the aquasuite to the newest version. This version renewed as well the FW of the quadro.
Now "Flow" disappeard.
 

Jojo

Member
yes, only Flow missing.

[attachment=3096]
 

Attachments

  • 2018-10-23 11_30_55-Window.jpg
    2018-10-23 11_30_55-Window.jpg
    20.9 KB · Views: 4

Martin

HWiNFO Author
Staff member
OK, I will try to fix this in the next Beta build, which is scheduled for release tomorrow.
 

Jojo

Member
Hi,
it works perfect for me. Everything shows up.
If you need another DBG file, let me know.
Thanks for your work.

[attachment=3097]
 

Attachments

  • 2018-10-24 13_01_33-Window.jpg
    2018-10-24 13_01_33-Window.jpg
    29.1 KB · Views: 6

Jojo

Member
Martin said:
I'm not aware of any way how to determine the custom units used for soft sensors.


When I played around with the new beta version, I figured out, that it`s possible to customise the Software Sensors in HWiNFO into any unit, even with multiplyer.
Now my custom Flowmeter connected to Fan4-port reports the right value. Wonderfull! So its all perfect for me.


[attachment=3098]
 

Attachments

  • 2018-10-24 14_24_15-Window.jpg
    2018-10-24 14_24_15-Window.jpg
    202.1 KB · Views: 5
Top