Black screen crash

asder00

New Member
After resetting my hwinfo settings im encountering a black screen crash with gpu fan to 100% everytime i start the program 2 seconds after the sensor window is shown (im using sensor only mode)
Before this problem i remember having disabled the vrm voltage sensor for my gpu weeks ago (Vega 64 Liquid) and hwinfo was working fine.

I enabled both debug options to generate the file, the system crashed the same way but this time while scanning...
Using latest beta v5.61-3293
 

Attachments

  • HWiNFO64.DBG
    636.9 KB · Views: 1

Martin

HWiNFO Author
Staff member
Disabling the "GPU I2C Support" option should solve this problem. It will disable any GPU VRM access including its initial scan.
 

Martin

HWiNFO Author
Staff member
I'm not sure. I have tested several Vega cards and got lots of reports, but don't think I have seen such a problem there yet.
 

asder00

New Member
Beta build 3297: same black screen crash, 2 seconds after viewing sensor page, or while scanning with debug mode on.
 

Attachments

  • HWiNFO64.DBG
    647.4 KB · Views: 1
Top