IPMI Sys Fan speed not reported

duanet

Member
Two machines with identical hardware: HWiNFO64 v6.14-3980 reports fan speed for one under IPMI, but doesn't report it for the other system. "Sys Fan" doesn't show up in Sensor Settings > Layout in the non-reporting machine. Is there another setting?

Thanks,
Duane
 
Is the fan on the other machine spinning? If yes, please attach the HWiNFO Debug File of both machines for analysis.
 
.dbg files attached
 

Attachments

  • HWiNFO64_no_fan.DBG.7z
    104.5 KB · Views: 0
  • HWiNFO64_yes_fans.DBG.7z
    69.9 KB · Views: 0
According to the dumps you provided the other system really isn't providing any fan information via IPMI. The difference is most probably due to different firmware versions.
But those machines aren't absolutely identical either as the mainboard versions are different:
J17012-503 - no fan
J17012-551 - fan

BIOS versions:
SE5C620.86B.02.01.0008.031920191559 03/19/2019 - no fan
SE5C620.86B.02.01.0009.092820190230 09/28/2019 - fan

Try to upgrade the BIOS/firmware on the system if that will help.
 
According to the dumps you provided the other system really isn't providing any fan information via IPMI. The difference is most probably due to different firmware versions.
But those machines aren't absolutely identical either as the mainboard versions are different:
J17012-503 - no fan
J17012-551 - fan

BIOS versions:
SE5C620.86B.02.01.0008.031920191559 03/19/2019 - no fan
SE5C620.86B.02.01.0009.092820190230 09/28/2019 - fan

Try to upgrade the BIOS/firmware on the system if that will help.
Thank you
 
Back
Top