Recent content by Chozo4

If it helps... I'm running a Production Sample EPYC 7252 on bare metal here under Windows 10 1809. Noticing a similar trend with the CPU Die (Average) temp accordingly which may point to this not being an ES exclusive issue or even specific to 7452/7502 for that matter. There is barely any load...

What I'm thinking as an option is to add a drop down selector or clickable number on a per node basis for those timings and add memory timings in the sensors display for each detected mode. Unless this just happens to be a special case and most other instances don't use different per node timings.

Greetings Martin, New board, new issues. Decided to give a new board a try to give a crack at the older Socket G34 Opterons and see what they can do in my personal setup. This chinese board is quirky with readings it seems but installing the drivers seemed to resolve most of them. Board name...

Heya Martin, I'm curious if there would be some way to, say, some way to add custom labels to the RTSS OSD on a per row basis? This would be a nice addition to help sort and categorize readings in the overlay without having to actually rename the first reading per row and ruin the sensor...

Greetings again, This time I am not sure if it is a bug or intentional... I have drive scans disabled in the settings as well as S.M.A.R.T Support and ATA Statistics Support so as to reduce overhead by disabling drive monitoring accordingly. Despite this, the drives are still queried...

I would like to confirm that the issue has seemingly been resolved after a couple test runs with v5.83-3430. I will update this thread accordingly if issue #2 returns at all. I appreciate your swift action in resolving any issues that crop up. Thank you! :)

Been quite some time since I have reported a bug here. Just moved on to a 64bit version of windows (Windows 7N Professional) and changed over to the 64bit version of HWInfo accordingly. While trimming down and debugging my install for minimizing I came across a couple issues with the last few...

Greetings Martin, Been a while since I've came around here as everything has been running quite swimmingly. However there is something I would love to see available in the sensors data. ... Drive power state. Same data accessible via HDParm -C for IDE/SATA. I have tested it under Windows...

Greetings Martin, Been a while since I've posted a bug report as everything have been working quite smoothly. Normally I tend to use the latest beta's out of habit knowing they can be bugged but then that's where bug reports come in to help with the process. The Latest final build 'v4.46'...

Came across this bug just now when trying to narrow down an annoyance after a fresh reinstall of windows (was experiencing it prior as well). OS: Windows Server 2003 Enterprise R2 HWInfo: v4.10 32-bit Related to: HWiNFO32/64 Kernel Driver Description: On system boot the following...

RE: [FIXED] Volterra VT1165 - Reading only VRM Phase2 Temp Hmm.. after some more testing I noticed that the phases are being misreported over Low-Level I/O (NVAPI works fine) and instead matching temps with Phase #2. Came across this when adjusting settings to reduce time spent in the kernel...

RE: Showing CPU Northbridge Voltage (CPUNBv) in Sensors? Fair enough, it was the requested voltage that I was mainly concerned about for pulling info from. It had just seemed a bit odd that the requested CPU voltage was read into the sensors but not the requested CPU-NB voltage despite it...

RE: Showing CPU Northbridge Voltage (CPUNBv) in Sensors? Yes, that is correct - labeled as 'Northbridge Status". http://rwinds.no-ip.org/~archive/CPUNBv_OpPoints.png

I'd taken note that the CPU Northbridge (CPUNBv) Voltage is listed in the summary view but yet is not shown in the sensor view. Since the voltages are being altered based on powerstate in some cases it would be helpful to keep an eye on said voltages through the sensor view. Is there any...

*nods* Fair enough as it was nothing more than a thought I'd pitch your way. I have no requests at all for any filters but appreciate asking about it. To avoid user confusion, I was thinking more along the lines of options manually entered through the INI rather than through the interface...